Installation Location - Heatrae Sadia SUPREME Fitting Instructions And User Manual

2.0 INSTALLATION - LOCATION
2.1 The Supreme stores and dispenses water at, or close to, boiling
point at all times it is switched on. Due caution must be taken
when choosing a location for the product to minimise misuse. It is
recomended that the unit be mounted in such a manner that the
operator can stand directly facing the unit with the controls at a
recommended height from the floor to the draw-off tap of 1200mm
+/- 100mm.
2.2 Sufficient room should be left around the heater to allow access for
maintenance and servicing.
2.3 Install the unit on a surface suitable for near boiling temperatures
and the working weight of the unit.
2.4 The unit is not suitable for installation in an area where a water jet
could be used.
3.0 DIMENSIONS
Figure 01: Dimensions
B
A
A
mm 535
D
B C
240 360
C
OVERFLOW
INLET
CONNECTION
D
190
5