Table of Contents
Advertisement
6.0 INSTALLATION - ELECTRICAL
REQUIREMENTS
6.1 The unit is supplied with a fitted plug and lead and should be plugged
into a 240v 13A electrical socket, capable of carrying a load of 3kW. If
the supply cord is damaged it must be replaced by the manufacturer,
its service agent, or similarly qualified persons in order to avoid a
hazard.
6.2 The installation of a residual current device (RCD) having a rated
residual operating current not exceeding 30 mA is advisable.
6.3 This appliance must be earthed.
6.4 The installation, supply cable and circuit protection must conform
to the latest BS7671 'Requirements for electrical installations' (IEE
Wiring Regulations).
6.5 If the Supreme is not used for significant periods of time running costs
can be reduced by switching the unit off. It is recommended that this is
done automatically by incorporating a suitable timeswitch in the supply
to the unit. The use of accessory No. 95 970 124 is recommended. The
timeswitch can then be set to switch the unit on for a suitable period
to allow it to heat up before it is next to be used. NOTE:If a timeswitch
is used, it must be capable of switching 13 Amps resistive load.
7
Hide quick links:
Advertisement
Table of Contents
