Safety Instructions - K-array Redline KL18ma User Manual

SYMBOLS
This symbol, wherever it appears, alerts you to
important operating and maintenance istructions in
the accompanying literature. Read the manual!
Separate collection of electrical and electronic
devices.
For information about the disposal of Waste Electrical
and Electronic Equipment (WEEE), please refer to
the website at
www.scanning.datalogic.com

1. SAFETY INSTRUCTIONS

• To reduce the risk of electric shock, disconnect the amplifier from the AC mains before installing audio cable.
Reconnect the power cord only after making all signal connections.
• Connect the amplifier to a two-pole, three wire grounding mains receptacle. The receptacle must be connected to
a fuse or circuit breaker. Connection to any other type of receptacle poses a shock hazard and may violate local
electrical codes.
• Do not install the amplifier in wet or humid locations without using weather protection.
• Do not allow water or any foreign object to get inside the amplifier. Do not put objects containing liquid on, or near,
the unit.
• To reduce the risk of overheating the amplifier, avoid exposing it to direct sunlight. Do not install the unit near heat
emitting appliances, such as a room heater or stove.
• No naked flame sources such like lighted candles should be placed on the device.
• The amplifier should be placed so that its location does not interfere with its proper ventilation. For example, the
appliance should not be situated on a bed, carpet, or similar surface that may create an obstacle for the ventilation
openings.
USER'S MANUAL
REV. A
!
Wa r n i n g ! D a n g e r o u s
voltages: risck of electric
schock.
The item meets all the
essential "Health and
Safety" requirements of
the revelant European
Directives.
!
CAUTION
pag. 02
This device complies with
Restriction of Hazardous
Substances Directive.
This symbol alerts the
user to the presence of
recommendations about
p r o d u c t ' s u s e a n d
maintenance.
!
ENGLISH