K-array Redline KL18ma User Manual

USER'S MANUAL
ENGLISH
K
KR200S
The KR200S is a high performance ultra-slim powered
K-array is the new voice that sings aloud, "outside the
two way system designed for small to medium wavefront
chorus", and whose performance is better than any
systems, in both mobile and installed applications. The
other products. Born on-the-road, in the PA world,
KR200S includes two KR200 satellites and 2 KL18ma
where you get no discount, you have to give your
powered subwoofers. The KL18ma features a 1600 watt 18"
best as fast as you can, often with a "compressed"
drive unit with neodymium magnet structure and suspension
budget, K-Array systems have been designed to
engineered for maximum linear excursion. Its ultra-light reflex
give precise answers to precise needs.
cabinet is fitted with two pocket handles and one 35mm pole
mounting point for easy installation with every satellite speaker on
Driven by new generation digital engines, with
it. The KR200S features a line array of 32x2" high efficiency
power/dimension/weight ratios that are ten
neodymium magnet drivers enclosed in an ultra-strong chassis, to
times better than any other professional
ensure high resistance and durability in the hardest working
products, K-arrays can deliver the full
conditions. The KR200S thanks to true line array technologies and
spectrum of musical styles with clarity, power,
powerful DSP system, achieve outstanding power and coherence
punch, intelligibility and evenness across throughout the intended coverage allowing a wide dynamic range and a
faithful reproduction of sound. All the components are designed by K-
both volume levels and the frequency
array R&D department and custom made under K-array control
spectrum. These systems can be remotely
quality system.
controlled and come with a sophisticated
on-board software, allowing the user to
shape their performance to taste and
needs. Inside K-array systems you will

SAFETY INSTRUCTIONS

find something that only we can offer:
the best in technology, proudly
• To reduce the risk of electric shock, disconnect the loudspeaker from the AC mains
conceived, designed and produced in
before installing audio cable. Reconnect the power cord only after making all signal
Italy. If they were cars, they would
connections.
be Ferrari. Don't agree to pay for a
• Connect the loudspeaker to a two-pole, three wire grounding mains receptacle. The
simple brand, claim performance,
receptacle must be connected to a fuse or circuit breaker. Connection to any other type of
receptacle poses a shock hazard and may violate local electrical codes.
and don't believe those who
maintain that these products are
• Do not install the loudspeaker in wet or humid locations without using weather
protection.
only for few people, the only
truth is that K-array systems
• Do not allow water or any foreign object to get inside the loudspeaker. Do not put objects
are unique, but affordable and containing liquid on, or near, the unit.
within everybody's reach!
• To reduce the risk of overheating the loudspeaker, avoid exposing it to direct sunlight. Do not
install the unit near heat emitting appliances, such as a room heater or stove.
HP Sound Equipment
• This loudspeaker contains potentially hazardous voltages. Do not attempt to disassemble the
unit. The unit contains no user serviceable parts. Repairs should be performed only by factory
trained service personnel.
REV.01