Change The Crossover Type - Kenwood DPX-5000BT Instruction Manual

GETTING STARTED
DISPLAY
EASY MENU When entering [FUNCTION]...
ON: ZONE1 and ZONE2 illuminations change to white color. ; OFF: ZONE2
illumination changes to white color while ZONE1 illumination remains as
[COLOR SELECT] color. ( 21)
(Refer to the illustration on page 21 for zone identification.)
TUNER SETTING
PRESET TYPE NORMAL: Memorizes one station for each preset button in each band
(FM1/ FM2/ FM3/ AM/ SW1/ SW2). ; MIX: Memorizes one station for
each preset button, regardless of the selected band.
SYSTEM
KEY BEEP* ON: Activates the keypress tone. ; OFF: Deactivates.
SOURCE SELECT
PANDORA SRC ON: Enables PANDORA in source selection. ; OFF: Disables. ( 10)
BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. ( 10)
CD READ 1: Automatically distinguishes between audio file disc and music CD. ;
2: Forces to play as a music CD. No sound can be heard if an audio file
disc is played.
F/W UPDATE
UPDATE SYSTEM
F/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
www.kenwood.com/cs/ce/
FACTORY RESET YES: Resets the settings to default (except the stored station). ;
NO: Cancels.
* Not applicable if 3-way crossover is selected.
Default: XX
CLOCK
CLOCK DISPLAY ON: The clock time is shown on the display even when the unit is turned
ENGLISH
TURKCE

Change the crossover type

1
Press
2
Press and hold number buttons 4 and 5 to enter crossover select.
The current crossover type appears.
3
Turn the volume knob to select "2WAY" or "3WAY", then press the
knob.
4
Turn the volume knob to select "YES" or "NO", then press the knob.
The selected crossover type appears.
• To cancel, press and hold
• To adjust the selected crossover settings, ( 19).
Caution
Select a crossover type according to how the speakers are connected.
( 29)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
off. ; OFF: Cancels.
Select the display language for [FUNCTION] menu and music
information if applicable.
By default, [ENGLISH] is selected.
repeatedly to enter STANDBY.
.
5
ENGLISH