Search for a station
repeatedly to select TUNER.
repeatedly (or press
FM1/ FM2/ FM3/ AM/ SW1/ SW2.
• To change the searching method for
: Automatically search for a station.
: Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6) (or press
one of the number buttons (1 to 6) on RC-406).
Direct Access Tuning (using RC-406)
Press DIRECT to enter Direct Access Tuning.
Press the number buttons to enter a frequency.
to search for a station.
• To cancel, press
• If no operation is done for 10 seconds after step
on RC-406) to select
on RC-406) to search for a station.
, Direct Access Tuning is
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select an item (see the following
table), then press the knob.
until the desired item is selected or activated.
Press and hold
To return to the previous setting item, press
ON: Searches only AM/ SW1/ SW2 stations with good
reception. ; OFF: Cancels.
• Settings made are applicable only to the selected source/
station. Once you change the source/station, you need to
make the settings again.
YES: Automatically starts memorizing 6 stations with good
reception. ; NO: Cancels.
• Selectable only if [NORMAL] is selected for
[PRESET TYPE]. ( 5)
ON: Improves the FM reception, but the stereo effect may be
lost. ; OFF: Cancels.
ON: The unit will temporarily switch to News Programme if
available. ; OFF: Cancels.
ON: Switches to another station only in the specific region
using the "AF" control. ; OFF: Cancels.
ON: Automatically searches for another station broadcasting
the same program in the same Radio Data System network
with better reception when the current reception is poor. ;