Bluetooth Test Mode; Bluetooth — Audio; Audio Player Via Bluetooth - Kenwood DPX-5000BT Instruction Manual

BLUETOOTH®

Bluetooth test mode

You can check the connectivity of the
supported profile between the Bluetooth
device and the unit.
• Make sure there is no Bluetooth device
paired.
1
Press and hold .
"PLEASE PAIR YOUR PHONE PIN 0000"
appears.
2
Search and select this unit model name
(DPX-50 ** BT) on the Bluetooth device.
3
Operate the Bluetooth device to confirm
pairing.
"TESTING" flashes on the display.
The connectivity result (OK or NG) appears
after the test.
PAIRING: Pairing status
HF CNT: Hands-Free Profile (HFP)
compatibility
AUD CNT: Advanced Audio Distribution
Profile (A2DP) compatibility
PB DL: Phonebook Access profile (PBAP)
compatibility
To cancel test mode, press and hold
turn off the unit.
BLUETOOTH — Audio

Audio player via Bluetooth

1
Press repeatedly to select BT AUDIO (or press SRC on RC-406).
2
Operate the Bluetooth audio player to start playback.
To
Playback / pause
Select group or folder
Reverse / Forward skip
Reverse / Fast-forward
Repeat play
to
Random play
Select a file from a
folder/list
Operations and display indications may differ according to their availability on the connected device.
On the faceplate
Press .
Press .
Press .
Press and hold .
Press repeatedly.
ALL REPEAT, FILE REPEAT, REPEAT OFF
Press and hold to select
ALL RANDOM.
• Press to select RANDOM OFF.
Refer to "Select a file from a folder/
list" on page 9.
On the remote control
Press .
Press .
Press .
Press and hold .
( Not available )
( Not available )
( Not available )
17
ENGLISH