Table of Contents
Advertisement
RBDS features
Function
of the KDC-6011
a
Program Type (PTY) Function
Conduct auto seek tuning only on those stations with selected
kinds of programs.
1 Press the m(PTY) button.
"PTY" is displayed once the program type selection mode is
entered.
You cannot use this function while the traffic information function
is turned on.
2 Select the type of program to be received
* Press either the FM or AM buttons repeatedly to select the
type of program you want to listen to.
The selection includes:
Speech +> 1.News(News) +> 2.Information(Information)
+>
3.Sports(Sports) «> 4. Talk(Talk) «>» 5. Rock(Rock) «* 6.Classic
Rock(Classic Rock) «> 7.Adult Hits(Adult Hits)
8.Soft
Rock(Soft Rock) «+ 9.Top 40(Top 40) < 10.Country(Country)
«+ 11.Oldies(Oldies) «+ 12.Soft(Soft) «+
13.Nostalgia(Nostalgia) «» 14. Jazz(Jazz) «>
15.Classical(Classical) «> 16.R&B(Rhythm and Blues)
«>
17. Soft R&B(Soft R & B) «* 18.Language(Foreign Language)
++ 19.Religious Music(Religious Music) «+ 20.Religious
Talk(Religious Taik) « > 21.Personality(Personality) +>
22.Public(Public) «» Music
«+ Speech «+
(Speech.....1~4, 18, 20~22,
Music.....5~17, 19)
* You can select the type of program directly by pressing a
preset button. The buttons are factory-set to the following
type of programs:
1. Music
3. News
4. Sports
6. Jazz
Changing the Preset Button Settings for Program Type
After selecting the type of program to be stored in a certain
preset button, press that button for at least two seconds.
The previously stored data for that button are erased and the new
program type is stored.
3 Seeking the Selected Program Type
Press the <4 or BRI button to make a seek of frequencies
with your selected type of program.
2. Speech
5. Classical
The display blinks and the seek starts.'
*
"If your selected type of prograrh i is found: the name or ihe
;
frequency of the station is displayed and the station istuned
~
into.
'
"PTY" blinks in the display for about 30 seconds.s
lf you make no key input in 30 seconds, the PTY selection
mode will turn off automatically.
If no program can be found, "NO PTY' is displayed.
If you want to select another type of program, repeat steps 2 and
3 above.
Switching to Other Stations with the Same Type of Program:
When "PTY" is blinking in the display, perform auto seek
tuning.
The tuner scans for another station with the same type of
program.
Canceling Program Type Function During Its Operation:
Press the ma(PTY) button.
Confirming Program Type:
Press the DISP button.
The program type of the station currently tuned to will be
displayed for five seconds. During that time, "E° will blink in the
display.
If you tune to frequencies for which no program type has been
stored, "NO ENTRY' will be displayed.
To register a non-RBDS station as a program type:
1 Tune your radio to the non-RBDS station that you want to
register as the program type.
2 Press the PI(PTY) button to enter the program type selection
mode.
3 Press the FM/AM button to select the program type you want
to register. Follow the instructions in 2 to enter the program
type selection mode.
4 Press the DISP button for at least two seconds.
The station will be registered as a program type, allowing it to
be the target of frequency seeks just as RBDS stations are.
ae (ae
Advertisement
Table of Contents
