Indicator Messages - NEC LT265 User Manual

Indicator Messages

Power Indicator
Indicator Condition
Blinking light Green
Green
Orange
Steady light Green
Orange
Status Indicator
Indicator Condition
Blinking light Red
Green
Orange
Steady light Orange
Green
Lamp Indicator
Indicator Condition
Blinking light Red
Red
Steady light
Green
Printed on recycled paper
Off
0.5 sec On,
0.5 sec Off
2.5 sec On,
0.5 sec Off
0.5 sec On,
0.5 sec Off
Off
1 cycle (0.5 sec On,
2.5 sec Off)
2 cycle (0.5 sec On,
0.5 sec Of)
3 cycle (0.5 sec On,
0.5 sec Off)
4 cycle (0.5 sec On,
0.5 sec Off)
6 cycle (0.5 sec On,
0.5 sec Off)
1 cycle(0.5 sec On,
2.5 sec Off)
Off
Projector Condition
The main power is off
The projector is getting ready to turn on.
Off Timer is activated.
The projector is cooling down.
The projector is turned on.
The projector is in Normal standby or
Power-saving standby mode.
Projector Condition
Normal
Lamp cover error
Temperature error
Power error
Fan error
Lamp error
Re-firing the lamp
Network conflict
Cabinet button is locked
The projector is in Normal standby mode. —
Projector Condition
Normal
Lamp has reached its end of life. Lamp
replacement message will be displayed.
Lamp has been used beyond its limit. The
projector will not turn on until the lamp is
replaced.
Lamp mode is set to Eco mode
Note
—
Wait for a moment.
—
Wait for a moment.
—
—
Note
—
Replace the lamp cover correctly.
The projector is overheated. Move
the projector to a cooler location.
Power unit will not work correctly.
Fans will not work correctly.
Lamp fails to light. Wait a full
minute and then turn on again.
The projector is re-firing.
Network will not work correctly.
You have pressed cabinet button
when Cabinet Button is locked.
Note
—
Replace the lamp.
Replace the lamp.
—
Printed in Japan
7N8P5171