NEC LT265 User Manual page 75

Deleting Captured Images
Using the Delete command on the Viewer menu allows you to delete captured images.
To delete captured images:
Preparation: Make sure that the PC card is inserted into the PC card slot or USB memory into the USB port of the
projector.
1. Press the VIEWER button on the remote control to display an image.
2. Press the MENU button to display the Viewer menu.
3. Use the button to select "Thumbnails" and then press the ENTER button.
The Thumbnail screen will be displayed.
Slot 1
3 Fichiers
_CAP_
_RESTORE
RECYCLED
1/3 0000.jpg 60KB
sélection : ENTER
NOTE: To change highlight from the Thumbnails screen (pane on the right) to a directory tree (pane on the left) , press the EXIT
button. To return highlight to the Thumbnails screen, press the ENTER button.
4. Use the buttons to select an image you wish to delete.
5. Press the MENU button to display the Viewer menu.
6. Use the button to select "Delete" and then press the ENTER button.
A confirmation message will be displayed.
7. Use the button to select "Yes" and then press the ENTER button.
This completes deleting.
0000.jpg 0001.jpg 0002.jpg
dossier : EXIT
?
68
5. Using the Viewer