NEC LT265 User Manual page 51

8. Press the ENTER button.
Screen
9. Use the SELECT
On the Cornerstone adjustment screen, select "Exit" or press the EXIT button on the remote control.
Screen
The confirmation screen is displayed.
10 .Press the SELECT
This completes the keystone correction.
Selecting "Cancel" will return to the adjustment screen without saving changes (Step 3).
Selecting "Reset" will return to the factory default.
Selecting "Undo" will exit without saving changes.
NOTE: To reset the 3D Reform correction setting values, press and hold the 3D REFORM button for a minimum of 2 seconds.
NOTE: During 3D Reform adjustment, "Aspect Ratio" and "Screen" may not be available. Should this happen, first reset the 3D
Reform data and then do each setting. Second repeat the 3D Reform adjustment. Changing Aspect Ratio and/or Screen setting
can limit 3D Reform in its adjustable range.
button to select another icon which points in the direction.
or button to highlight the [OK] and press the ENTER button.
44
4. Convenient Features