Selecting A Source - NEC LT265 User Manual

Selecting a Source

Selecting the computer or video source
Using the Remote Control
Press any one of the COMPUTER 1/2, VIDEO, S-VIDEO, VIEWER or LAN but-
tons.
Selecting from Source List
Press and quickly release the SOURCE button on the projector cabinet to display
the Source list. Each time the SOURCE button is pressed, the input source will
change as follows: "Computer 1/2", "Video" (VCR or laser disc player), "S-Video",
"Viewer" (slides on a PC card) or "LAN" (LAN port [RJ-45] or wireless LAN card).
To display the selected source, press the ENTER button.
Detecting the Signal Automatically
Press and hold the SOURCE button for a minimum of 1 second, the projector will
search for the next available input source. Each time you press and hold the
SOURCE button for a minimum of 1 second, the input source will change as
follows:
Computer1 Computer2
If no input signal is present, the input will be skipped. When the input source you
wish to project is displayed, release the button.
Video S-Video Viewer
3. Projecting an Image (Basic Operation)
Computer1 ...
30
VIDEO COMPUTER LAN
1
S-VIDEO VIEWER
2
PIC-MUTE AUTO ADJ. SLIDE
HELP
VOLUME
PICTURE
ASPECT
FREEZE 3D REFORM
SOURCE AUTO ADJUST
SELECT
LAMP
STATUS
3D REFORM ON/STAND BY POWER
PC CARD
SOURCE AUTO ADJUST
SELECT
LAMP
STATUS
3D REFORM ON/STAND BY POWER
PC CARD