Product Checking And Parts Identification - Mitsubishi Electric FR-D720-008 Installation Manuallines

1 PRODUCT CHECKING AND PARTS IDENTIFICATION

Unpack the inverter and check the capacity plate on the front cover and the rating plate on the inverter side face to ensure that
the product agrees with your order and the inverter is intact.
Inverter model
-
FR
Symbol Voltage class
D720 Three-phase 200V class
Three-phase 400V class
D740
D720S Single-phase 200V class
D710W
Single-phase 100V class
Installation of the inverter
Enclosure surface mounting
Remove the front cover and wiring cover to mount the inverter to the surface.
FR-D720-008 to 042
FR-D720S-008 to 042
FR-D710W-008 to 025
Front cover
Note
When encasing multiple inverters, install them in parallel as a
cooling measure.
When using the inverters at the surrounding air temperature of
40°C (104°F) or less, the inverters can be installed without any
clearance between them (0cm (0 inches) clearance). When
surrounding air temperature exceeds 40°C (104°F), clearances
between the inverters should be 1cm (0.39inches) or more (5cm
(1.96inches) or more for the FR-D720-238 and FR-D740-120 or
higher).
Install the inverter vertically.
- - NA
D740 036
Represents
the rated
current
Wiring cover
Capacity plate
Rating plate
Rating plate
Inverter model
Input rating
Output rating
Serial number
FR-D720-070 or higher
FR-D740-012 or higher
FR-D720S-070, 100
FR-D710W-042
Front cover
10cm(3.94inches)
or more
10cm(3.94inches)
or more
FR-D740-036-NA
Inverter model Serial number
Production year and month
DATE:XXXX-XX
FR-D740-036-NA
Wiring cover
1