Enabling The Ir Port; Enabling Infrared Communications - NEC Versa L320 User Manual

the IR port for the first time, you must enable the device. For Windows 98 operating
systems, also enable infrared communications in the Windows Control Panel. See the
following sections to enable the IR port and infrared communications.

Enabling the IR Port

Follow these steps to enable the IR port.
Note
defaults to the Fast IR (FIR) 4.0-Mbit/sec speed.
Access the BIOS Setup utility at power-on. Just press
1.
<F2> to enter Setup
The BIOS Setup main menu appears.
Using the arrow keys, select the Advanced menu and I/O Device Configuration
2.
parameter.
3. Press
Using the arrow keys, select "Infrared port." Press
4.
Press
5.
Select the Exit menu. Select "Exit Saving Changes." Press
6.
confirm changes and to exit the utility.

Enabling Infrared Communications

If you have a system running the Windows 98 SE operating system, enable infrared
communications as follows.
From the Windows Start menu, select Settings and Control Panel.
1.
Double click the Infrared icon.
2.
Select the Options tab.
3.
Check the box to "Enable infrared communication."
4.
Click Apply and clickOK.
5.
Your NEC Versa ships with the IR port disabled. Before using
Once you enable the IR port in the BIOS Setup utility, the transfer speed
," appears.
Enter to select the I/O Device Configuration menu.
to select the change.
Enter
F2
Enter
Communicating with Your NEC Versa 6-9
when the prompt, "
Press
and select "Auto."
. Select "Yes" to
Enter