Ir Port; Enabling The Ir Port - NEC VXi User Manual

5. To modify the application to launch when pressing the Internet shortcut key,
change the variable Btn7_AP1=iexplore.exe to the *.exe of your choice. Be sure to
use the full path name, for example, C:\Program Files\Netscape\Netscape.exe.
In addition, modify the variable Btn7_Name=Internet to an appropriate and
corresponding identifier.
6. Click File, Save, then File, Exit to save your changes.
You are now ready to use your shortcut keys to launch the applications of your
choice.

IR Port

The IR port on the front of your system lets your NEC Versa VXi communicate with
other devices that also use infrared technology. The IR port is Infrared Data
Association (IrDA) compatible. You can easily transfer files between your NEC Versa
Note and an IR-equipped desktop, or print to an IR-equipped printer without using
cables.
IR transfer speed ranges from 2.4 Kbit/sec to 4.0 Mbit/sec. You can limit the IR
transfer speed through the Infrared icon in the Windows control panel. Double click the
icon and select the options to access the speed parameter.
Your NEC Versa transfers data at the speed compatible with the receiving device.
the IR port for the first time, you must enable the device. See the following section to
enable the IR port.

Enabling the IR Port

Follow these steps to enable the IR port.
1. Access the BIOS Setup utility at power-on. Just press
<F2> to enter Setup
The BIOS Setup main menu appears.
Select the Peripheral Setup Menu.
2.
Set the IR Serial Port to "Auto."
3.
Exit the Peripheral Setup menu.
4.
Save the settings and exit the BIOS Setup utility.
5.
Your NEC Versa ships with the IR port disabled. Before using
," appears.
Communicating with Your NEC Versa 6-9
F2 when the prompt, "
Press