Table of Contents
Advertisement
Plug one end of the AC power cable into the AC adapter and the other end into a
2.
properly grounded 120- or 240-volt, 50- or 60-Hz wall outlet.
adapter clear of objects lets the adapter cool properly during use.
Only use the AC adapter that comes with your NEC Versa L320. Although other
adapters look similar, using them can damage your system.
Powering On Your System
Power on the system as follows.
1.
Locate the latch on the front of the LCD panel, slide it to the right, and raise the
panel.
Locate the Power button and press it to turn on system power. For additional
2.
information about Power control buttons and power LEDs, refer to Chapter 1,
"Introducing the NEC Versa."
Connecting the AC adapter
Do not cover or place objects on the AC adapter. Keeping the
Getting Started 2-5
Advertisement
Table of Contents
