NEC Versa L320 User Manual page 91

Use the Product Recovery utility to perform a Full Disk Drive restore as follows.
Check the Product Recovery CD title and make sure that it is the correct CD for
1.
your NEC Versa computer and operating system.
Put the CD into the CD-ROM drive tray, close the drive door, and reboot your
2.
system.
3. Read the License Agreement screen that appears. Use the VersaGlide touchpad to
position the cursor on the Accept button. Left click to accept the agreement.
You have the option of accepting or declining the agreement. If you decline the
agreement, the recovery utility exits.
In the NEC Product Recovery utility screen, use the VersaGlide touchpad to
4.
choose Full Disk Drive to restore your hard disk drive to its original factory
installed state.
applications installed on your system.
5. Read the Warning screen.
A warning displays indicating that your hard disk is about to be erased.
Select Continue to proceed to perform a Full Disk Drive restore.
6.
If you select Back, the recovery utility returns to the prior screen, which has an exit
option.
If you select Continue, a screen with progress bars displays and lets you know the
progress of the recovery.
process.
7. When the recovery process is complete, you are prompted to remove the CD from
the CD-ROM drive and reboot your system.
Press
8.
A series of hardware detection screens display, the system reboots and the
Windows Setup screen appears. Follow the on-screen instructions to set up
Windows.
You are required to reenter your Microsoft license number.
4-18 Using the Operating System and Utilities
Choose your restore option carefully to prevent losing data and
Do not turn off or disturb the system during the recovery
, click Reboot, or press
Enter
to reboot your system.
Alt-R