Help - Telstra 5600 Manual

Help

Replacing the handset batteries
After a time, you may fi nd that the handset
l.
batteries are running out of charge more
quickly. This is a standard sign of wear and the
batteries will need replacing.
For spare 2 x AAA rechargeable NiMH batteries,
please contact your nearest electrical retailer
o
or TecHelp on 1300 369 193.
Problems
No display
No dial tone
You cannot link up with the base
s
s
No ring on the handset
Buzzing noise on my radio, TV, computer or hearing aid
The charging does not appear to be working
Cannot adjust an option in the base
Remove the battery compartment cover and
remove existing batteries. Insert new batteries
and replace the compartment cover.
NOTE: Telstra accepts no responsibility for
damage caused to your Telstra 5600/5600a
handset by using any other type of batteries.
Possible cause
The batteries may be dead. Recharge or replace the
batteries. Is the handset switched off? To switch the
handset on, see page 15.
Check that the telephone line cord is plugged into the
phone socket.
Check that the base is connected to the mains power and
switched on.
Is the display fl ashing ( ) ? Check that the base is connected
to the mains power and switched on.
Are you are out of range? Move the handset closer to the
base.
Are the batteries low or fl at? If so, charge the batteries or
replace them if necessary.
If using more than one base, check that you are connected
to the correct base, see page 51.
Check that the ringer volume is switched on, see page 36.
Check that the base is plugged into the phone socket and
that it is also connected to the mains power and switched
on.
Sometimes, your Telstra 5600/5600a and other DECT
compatible handsets can interfere with other electrical
equipment if placed too close. Try moving it at least one
metre away from such appliances
Check that the base is plugged into the mains socket and
switched on.
Check that you are using the correct power adaptor plug.
Check that the handset has slotted correctly into the base.
Check that the handset batteries have been correctly fi tted.
Someone else might be making changes using another
handset. Try again when the other handset user has
fi nished
53