Time Settings - Telstra 5600 Manual

Time settings

Use your phone as an alarm clock
Set the date and time and use your Telstra 5600/5600a to give you a reminder
alarm.
You can have a different alarm setting for each handset registered to your
base. The alarm rings only at the handset, not at the base or any other
handset.
Set alarm
1. Press Menu then scroll
Alarm.
2. Press OK to select On/Off. Scroll
want:
On Once – alarm goes off just once.
On Daily – alarm goes off same time each day.
Off – alarm off.
Press OK to confi rm.
3. If you are setting an alarm, the screen shows Time. Enter the time you want
the alarm to go off,
e.g.
Alarm tone
From a choice of 4, you can set which ringtone is played for your alarm.
1. Press Menu then scroll
Alarm.
2. Press to highlight Set Alarm Tone, and press OK.
3. Scroll or to select the Alarm Tone you want then press OK to
confi rm.
Switch alarm off
1. When the alarm sounds, press any button on the handset to switch if off.
to Time Settings and press OK. Press OK to select
or to highlight the option you
for 7.30am, then press OK to confi rm.
to Time Settings and press OK. Press OK to select
41
IMPORTANT
If you have
subscribed to Telstra
Calling Number
Display, the date
and time will be set
automatically when
you receive your fi rst
call and you will not
need to set the date
and time manually,
although this is an
option.
5600a only
The answering
machine Time/Day
setting must be
entered seperately.
*Excludes blocked
calls. Monthly
charge applies.
Available most areas.
When the alarm is
switched on, the
standby screen
shows the (Bell) icon