Using.pc-Mail; Setting.up.pc-Mail.account; Sending.pc-Mail - AU Mirach IS11PT Basic Manual

Using PC-mail
PC-mail can be used from your IS11PT by setting your mail account
used with au one mail or on your PC.
• A PC-mail account must be set in advance to use PC-mail.
• To use au one mail in PC-mail, au one mail must be set in advance
by acquiring an au one mail account, enabling IMAP setting (initial
setting), and setting a mail password.
* Mail messages saved in the IS11PT may be lost if au one mail POP download setting is
enabled and a POP3 server is set for the PC-mail in the IS11PT.
Setting Up PC-mail Account
A mail server can be set automatically for several mail addresses,
including au one mail addresses, and settings can be configured easily.
If the mail server is not set automatically, or if you want to configure
the settings manually, select "Manual setup" and specify a user name
and a mail server.
For details about mail server setting values, contact your service
provider or your mail account administrator beforehand.
1
On the Home screen, [
If no mail account is registered in PC-mail, the mail account
registration screen is displayed.
2
Select the mail address field → Enter a mail address.
3
Select the password field → Enter a password.
4
[Next]
The mail server is set automatically.
Depending on the mail address, the mail server may not be set
automatically. If the mail server is not set automatically, or if you
selected "Manual setup", specify a user name and a mail server.
] → [PC-mail]
5
Select the account name entry field → Enter a
account name.
6
Select the your name entry field → Enter your name.
7
[Done]
◎ When registering your second mail account, after step 1, press m →
[More] → [Accounts] → m → [Add account].
◎ From the third mail account, after step 1, press m → [Add account].
◎ When registering a Exchange account in PC-mail, a confirmation/setting
screen regarding security remote management is displayed during or after
the settings. Follow the instructions displayed on the screen.
◎ When setting the Exchange in "Accounts & sync", the exchange account
is set automatically in PC-mail.
Sending PC-mail
1
On the Home screen, [
If multiple mail accounts are registered, the PC-mail screen is
displayed. Select a mail account.
2
[Create new message]
3
Select the destination entry field → Enter a
destination.
4
Select the subject entry field → Enter a subject.
5
Select the message entry field → Enter a message.
6
[Send]
] → [PC-mail]
39