Changing.your.e-Mail.address; Setting.mail.filters - AU Mirach IS11PT Basic Manual

Changing Your E-mail Address
The e-mail address is automatically set when the E-mail is initialized,
but you can change the e-mail address after the initial settings.
1
On the e-mail screen/mail box screen/folder list
screen, [Setting] → [E-mail settings]
The e-mail settings screen is displayed.
2
[Other settings] → [OK]
3
[Eメールア ドレスの変更] (Change e-mail address) →
(Entry field) → Enter your security code
Select
→ [送信] (Send)
4
[承諾する] (Accept)
5
(Entry field) → Enter the part of the
Select
address to the left of "@" (variable part).
6
[送信] (Send) → [OK]
◎ You can input up to 30-byte alphanumeric characters, including "-", ".",
and "_" for the part of the e-mail address that can be changed. However,
you can not use consecutive "." or use them for the first or last character.
Also, you cannot use "0" as the first character.
◎ Note that immediately after changing your e-mail address, you may be not
be able to receive e-mails for a short time.
◎ If the e-mail address that you input is already being used, a message
appears requesting that you input a different e-mail address. Input a new
address.
◎ It is possible to change your e-mail address three times within a single
day.
◎ If the security code is incorrectly entered three times consecutively during
a single day, the changing operation will be disabled until the next day.
Setting Mail Filters
Mail filters have functions to receive and reject specific e-mail
messages and to reject messages spoofing cells phones or PHSs.
1
On the e-mail screen/mail box screen/folder list
screen, [Setting] → [E-mail settings]
The e-mail settings screen is displayed.
2
[Other settings] → [OK]
■ Setting.the.mail.filter.as.recommended
3
[オススメの設定はこちら] (See Recommended
Settings) → [登録] (Register)
Set the mail filter that enables to reject spoofing and auto-forwarded
mail messages, and to receive mail messages from cell phones, PHSs
or PCs.
■ Setting.details.of.the.mail.filter
3
[迷惑メールフィルター] (Mail Filter) → Select
(Entry field) → Enter your security code → [送信]
(Send)
4
カンタン設 1. 「携帯」 「 PHS」
定 (Simple 「PC」 メールを受
信 (1. Receive
Settings)
Mail Messages
from Cell Phone,
PHS or PC)
2. 「携帯」 「 PHS」
メールのみを受信
(2. Receive only
Mail Messages
from Cell Phone
or PHS)
Reject spoofing or auto-
forwarded mail messages,
and receive mail messages
from cell phones, PHSs or
PCs.
Reject mail messages from
PCs, spoofing mail messages
or auto-forwarded mail
messages, and receive mail
messages from cell phones
or PHSs.
33