Security Lock Service - AU Mirach IS11PT Basic Manual

Table of Contents

Advertisement

4
Valid Caller ID
You can register up to three phone numbers.
You can directly input a phone number or
select from Contacts or the call log. You can
also select "Payphone".
Specified period Set the time limit in which the number of
calls set in "Incoming call count" should be
received. Set from 1 to 10 minutes.
Incoming call
Set the number of incoming calls until the
count
Remote control lock is activated. Set from 3
to 10.
◎ You can tap a set Valid Caller ID and select "Change phone number",
"Remove this phone number", or "Remove all".
■ To activate the Remote control lock
1
Call your IS11PT from a phone registered in "Valid
Caller ID" as many times as set in "Incoming call
count" within the "Specified period".
◎ Be sure to send your phone number when calling.
◎ The Remote control lock cannot be activated if your IS11PT is turned off,
is outside the service area, or if "Airplane mode" is turned on. The Remote
control lock may also fail if your IS11PT is in an area with poor signal
quality.
◎ The Remote control lock cannot be activated if no au IC-Card, or if a IC-
Card which is not yours is inserted in your IS11PT.
◎ If "Area Settings" is set to something else than "Japan", the Remote
control lock activation is not guaranteed.
48
■ Unlocking the Remote control lock
Unlock the screen lock with your IS11PT.
◎ If "Set up screen lock" is set to "None", you can enter "1234" and tap [OK]
after sliding to unlock in order to unlock the Remote control lock.
■ Activating the Remote control lock using the

Security Lock Service

You can activate the Remote control lock on your IS11PT even if
you did not set the Remote control lock beforehand by calling the
Customer Service Center or by submitting the necessary information
from a PC. However, "Remote control lock" under "Select device
administrators" must be activated to use this feature (it is disabled at
the time of purchase).
The Security Lock Service is available free of charge.
■ Activate.the.Remote.control.lock.by.calling.the.Customer.Service.
Center
From au cell phones (toll-free): 113 (area code not required)
From any other cell phone or fixed-line phone (toll-free):
0077-7-113
• Available 24 hours a day.
• Follow the automated voice prompts to complete the procedure.
■ Activate.the.Remote.control.lock.through.au.Customer.Support.
(https://cs.kddi.com/)
Log in au Customer Support (https://cs.kddi.com/) and follow the
instructions on the screen to complete the procedure.

Advertisement

Table of Contents
loading

Table of Contents