Charging.the.battery.pack - AU Mirach IS11PT Basic Manual

Charging the Battery Pack
The battery pack is not fully charged at the time of purchase. Charge
the battery pack when you use the IS11PT for the first time or when
the battery level becomes low.
◎ The IS11PT and the battery pack may become warm while charging. This
is not a malfunction.
◎ Read carefully the Safety Precautions "安全上のご注意" in the Instruction
Manual (Japanese) before using the battery pack.
◎ The charging time may become longer depending on the function used
while charging.
◎ When using the IS11PT with the specified charger (sold separately)
connected for charging, it may induce a repetition of small charging
periods/electrical discharges. Repeatedly charging the IS11PT may
shorten the battery life.
◎ If the IS11PT charging indicator flashes in red, check that the battery is
correctly installed and that the cable is connected. If the indicator keeps
flashing, stop charging and contact an au shop or the Customer Service
Center.
◎ The common AC adapter 01 (sold separately) is for use in Japan with
100 V AC power supply. Do not use it with single-phase 200 V power
supply or voltage transformers.
When charging with a specified AC adapter (sold separately), other than
the common AC adapter 01 (sold separately), outside Japan, use a plug
adapter according to your destination. Do not charge the IS11PT using a
voltage transformer.
◎ After charging, make sure to close the external connection jack cover
securely, and do not pull or twist it forcefully.
8
■ Charging with the specified AC adapter (sold
separately) directly connected to the IS11PT
The specified AC adapter (sold separately) is required. (The AC
adapter appearance in the figure may differ from the actual shape of
the adapter you are using).
The following is an explanation of how to charge your IS11PT using
the common AC adapter 03 (sold separately).
◎ When charging with the common AC adapter 01 (sold separately),
the common AC adapter 02 (sold separately) or an AC adapter with
specifications similar to the common AC adapter 02, use the 18pin-
microUSB conversion adapter 01(sold separately) to make the connection
to the IS11PT.
◎ When starting charging with the IS11PT turned off, it automatically turns
on and the charging screen appears. Cell phone operation cannot be
performed when only the charging screen is displayed. When charging is
finished, the IS11PT automatically turns off.
◎ When charging the IS11PT with the power turned off, if charging is
stopped while the battery is almost empty, a message prompting to
charge the battery may appear.