Using C-Mail; Creating And Sending C-Mail Messages; Reading Received C-Mail Messages; Using Pc-Mail - AU Digno ISW11K Manual

2
Tap the status bar.
3
Select E-mail information.
The e-mail top screen is displayed.
4 Select a folder → Select the received E-mail.
The received E-mail message screen is displayed.

Using C-mail

C-mail is a service that uses phone numbers as addresses
to send or receive messages between cell phones.
Creating and Sending C-mail
Messages
You can send a message (message text) consisting of kanji,
hiragana, katakana, alphanumerics, symbols, pictograms
and face marks.
1
From the Main Menu, Cmail.
2
New message.
3 → Select a mail address from the contacts.
4 Select the text entry field → Enter a message
text.
5
Send.
32

Reading Received C-mail Messages

1
C-mail is received.
If C-mail is received,
the mail ring tone sounds.
2
Tap the status bar.
3
Select C-mail information.
The inbox screen is displayed.

Using PC-mail

You can use PC-mail setting an account of au one mail etc.
• Before using PC-mail to send/receive au one mail, you
must first configure au one mail settings.
1
From the Main Menu, PC mail.
The inbox screen is displayed.
If multiple mail accounts are registered, the combined
inbox screen is displayed.
When you use PC-mail for the first time, the mail account
setup screen is displayed, and then register a mail
account. For operation on registering a mail account,
refer to "Registering Another PC-mail Account".
appears on the status bar, and