Inserting Microsd Memory Card; Removing Microsd Memory Card - AU Mirach IS11PT Basic Manual

Inserting microSD Memory Card

1
Turn off the IS11PT and remove the battery pack.
2
Confirm the microSD memory card orientation and
insert it straight until it clicks.
Be sure to hear the click indicating that the memory card is locked.
Also, be careful not to remove your finger from the microSD memory
card until it locks as it may be ejected.
3
Install the battery pack and close the battery pack
cover.
◎ Do not touch the terminal part of the microSD memory card.
◎ Insert the microSD memory card with the correct side up and in the
appropriate orientation.
Inserting a memory card forcefully into the slot could result in failure to
remove the microSD memory card or damage.
14
(Front side)

Removing microSD Memory Card

1
Turn off the IS11PT and remove the battery pack.
2
Push the microSD memory card slowly until it clicks.
3
Pull slowly the microSD memory card.
4
Install the battery pack and close the battery pack
cover.
◎ Do not remove the microSD memory card forcefully. It may result to
damage or data loss.
◎ The microSD memory card may be warm after a long time use. It is
normal.
When you hear the click,
keep your finger onto the
microSD memory card and
let it come toward you.
The microSD memory card
will come out by itself. Be
careful as the card may
be ejected violently if you
remove your finger too fast
after pushing strongly.
Pull slowly and straight.
Depending on the microSD
memory cards, the lock
may not be release and
the microSD memory may
not come out. In this case,
remove it by gently pulling
in out with your finger.