Table of Contents
Advertisement
To Invoke Reset All:
♦ Press the FNC key →3→7→7. PSIII displays:
Reset All
[1]Set
♦ Press the FNC key or 1. For Mode 2* systems,
PSIII displays:
Password?
♦ Key in password.
♦ Press the FNC key to confirm. PSIII displays:
Reset All?
♦ Press the FNC key to confirm. PSIII displays:
Execute?
♦ Press the FNC key to confirm. PSIII displays:
Reset All
Complete
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
* Mode 2 features are only available on NEAX 2000 IVS Series 1900 software
or NEAX 2400 IMX Series 7300 software & Zone Transceiver Version 5.00
software or later.
A
S
CCESS
OFTKEYS
Followings are an example when softkey codes have
been programmed.
♦ Press the FNC key →4. PSIII displays:
48
Advertisement
Table of Contents
