Forced Trunk Disconnect; Group Call Pickup; Group Ring; Hold - NEC DS1000/2000 User Manual

Feature Operation

Forced Trunk Disconnect

Forced Trunk Disconnect is disabled by default.
To disconnect a busy outside line:
Press line key for busy outside line.
1.
OR
Press TALK and dial the line's Line Access Code (e.g., 101 for line 1).
2. Dial # to disconnect the line.
Press line key and dial the number you want to call.
3.

Group Call Pickup

Group Call Pickup is disabled by default.
To answer a call ringing a phone in your Pickup Group:
Press TALK and dial *# .
1.
OR
Press the flashing Group Pickup key.

Group Ring

Group Ring is disabled by default.
To answer a call ringing into your Ring Group:
1. Press TALK .

Hold

Hold is enabled by default.
To place an outside call on System Hold:
1. Press HOLD .
- The line key flashes fast to indicate that it is on Hold.
- The line will recall with a distinctive "wink-on" flash rate if you leave it on Hold too long.
To place an outside call on Exclusive Hold:
1. Press HOLD twice.
- The line key flashes with a distinctive "wink-on" flash rate to show when it is on Hold or recalling.
To place an Intercom call on Hold:
1. Press HOLD .
To pick up an outside call on Hold:
1. Press the flashing line key.
To pick up an Intercom call on Hold:
Press TALK + HOLD .
1.
26 ◆ Chapter 2: Features
DS1000/2000 Cordless Telephone User Guide