Removing Lines And Extensions - NEC DS1000/2000 User Manual

Feature Operation
Description
Message Center / Voice Mail
Key
Save Key
Account Code Key
Call Forwarding Key
Headset Key

Removing Lines and Extensions

Removing Lines and Extensions is disabled by default.
To removes lines and extensions from service:
1. Press TALK .
2. Dial #40 .
3. Dial the number of the extension you want to remove or return to service (e.g., 300).
OR
Dial the number of the trunk you want to remove or return to service (e.g., 101).
4. Dial 4 to return or 6 to remove.
32 ◆ Chapter 2: Features
Cordless Telephone Programmable Function Keys
Code
24 + Your Off: No messages in associated
extension or mailbox
Message Cen- Fast Flash: Messages are waiting
ter Extension in associated mailbox
25 No BLF
26 Off: Account Code inactive.
On: Account Code active for
call.
Fast Flash: Account Code entry
mode.
27 Off: Call Forwarding disabled.
Fast Flash: Extension in Call
Forwarding programming mode.
Wink Off: Call Forwarding
enabled.
BLF
•
TALK
ated mailbox.
• While on a call, press key to
Save number you just dialed.
• While idle, press key to
redial previously saved num-
ber.
Press to enter Account Code,
then press again to return to call.
• While idle, enters Call For-
warding programming mode
(the same as pressing TALK
and dialing *3).
• While busy, switches Call
Forwarding on and off.
Not available.
DS1000/2000 Cordless Telephone User Guide
Operation
+ Press to call associ-