Prime Line Preference; Privacy Release Groups; Programmable Function Keys - NEC DS1000/2000 User Manual

Feature Operation

Prime Line Preference

Intercom Prime Line Preference is enabled by default.
To place a call on your Prime Line:
Press TALK + Dial the call normally.
1.
- To bypass your Prime Line, press another line key before pressing TALK.

Privacy Release Groups

Privacy Release Groups is disabled by default.
To join an outside call with a member of your Privacy Release Group:
Press the busy line key.
1.
- Your display shows: CONFERENCE CALL
To prevent a member of your Privacy Release Group from joining your call:
Place or answer an outside call on a line key.
1.
Press the line key.
2.
3. Press the line key again to allow a co-worker to join in.

Programmable Function Keys

By default, keys 1-4 are line keys for outside lines 1-4. You can only set up cordless telephone function keys
from system programming.
Description
Undefined
Loop Key, Switched
Loop Key, Fixed
Line Key
Park Orbit Key
30 ◆ Chapter 2: Features
Cordless Telephone Programmable Function Keys
Code
00
01 Off: Idle
On: You are on a loop key call.
Slow Flash: Call is ringing the
loop key
02 + Trunk Off: Idle
Group (90-98) On: You are on a loop key call.
Slow Flash: Call is ringing the
loop key
03 + Trunk Off: Idle
number (e.g., On: Line busy
1) Slow Flash: Line ringing
04 + System Off: Park Orbit idle.
Orbit (60-69) On: Call parked in orbit by a co-
worker
Fast Flash: Has a call you
parked.
BLF
-
Incoming: Press key to answer
outside call.
Outgoing: Press key + Dial trunk
group (0-9) to place call.
Press key to place or answer out-
side call.
Press key to place or answer out-
side call.
Press key to Park or retrieve call.
DS1000/2000 Cordless Telephone User Guide
Operation
-