Warnings - Danfoss Link CC Installation Manual

Installation Guide

Warnings

Danfoss Link™ CC - Warnings
If a warning or an alert occurs, a yellow alert icon will be shown on the Standby screen
!
- follow the procedure to find more information. will be shown on the Standby screen.
Remove the front cover and press the Set-Up pin for 3 seconds.
1. Alert icon on the Standby
screen.
Room Symbols
Installer tool battery warning
Battery level Critical on device
Battery level low on device
Device not responding
Too many dead devices
Heating turned off in a room
VISGL45X © Danfoss
2. Select House Control.
Min. floor temperature limit
Tamper proof / Restrictions enabled
Manual operation
Icon for Floor Temperature
Icon for Room temperature
Icon for TRV
04/2011
3. Select Alerts.
GB
15