Upgrading Software Version - Danfoss Link CC Installation Manual

Installation Guide
Upgrading
software version
14
Danfoss Link™ CC - Upgrading software version
Danfoss Link™ software is upgradable. New software versions is published for free download on
www. heating.danfoss.com.
Download the software upgrade to a SD Mini memory card.
Remove the front cover and press the Set-Up pin for 3 seconds.
1. Select Software.
4. Select Start Upgrade.
TIP!
To avoid possible secession from the power supply, hold on top of Danfoss Link™ CC during insertion of the
memory card.
VISGL45X © Danfoss
2. Select Software Upgrade.
5. Select Upgrade Software Now!
04/2011
3. Insert memory card.
6. Select Continue.