IBM L40 SX Quick Reference page 67

$3.6.8.1 Using the utility installation program
$Information for using the utility installation program is provided in
$sections where the above programs are described.
$summary of how to use the utility installation program.
$Note: If you are using OS/2, make sure that the DOS compatibility box has
$ been configured.
$1. Insert the backup copy of the Reference Diskette into the diskette
$ drive.
$2. At the DOS prompt or the prompt on the DOS compatibility box, type
$ A:UINSTALL and press Enter.
$ The following screen appears.
+-------------------------------------------------------------------------
¦
$ ¦
¦
$ ¦ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
$ ¦
$ ¦
$ ¦ Enter the installation SOURCE drive letter, the drive that the program
$ ¦ installs FROM:
$ ¦
$ ¦ Source Drive ... [ A ]
$ ¦
$ ¦ Enter F1=Help
$ ¦ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
¦
$3. Press Enter twice.
$ The screen for selection appears.
$4. Using Down Arrow ( ) or Up Arrow ( ) select the item you desire.
$ Press Enter. Follow the instructions on the screen.
$5. Remove the backup copy of the Reference Diskette from the diskette
$ drive.
PS/2 Model L40 SX Quick Reference
Using the utility installation program
Installation Options
Installation Source Drive
F3=Exit
¦ Copyright IBM Corp. 1991
3.6.8.1 - 1
The following shows a