E.5.2 Installing The Parallel Connector Setup Program For - IBM L40 SX Quick Reference

#E.5 Parallel Connector Setup Program
#After POR (power-on reset), by default, the parallel connector of the
#Model L40 SX is set to extended mode that allows bidirectional input and
#output. However, some parallel devices do not work in extended mode.
#parallel connector setup program resets extended mode so such parallel
#devices can work. The programs both for DOS and OS/2 are available on the
#Reference Diskette.
Subtopics
E.5.1 Installing the Parallel Connector Setup Program for DOS
E.5.2 Installing the Parallel Connector Setup Program for OS/2
PS/2 Model L40 SX Quick Reference
Parallel Connector Setup Program
¦ Copyright IBM Corp. 1991
E.5 - 1
The