IBM L40 SX Quick Reference page 162

#E.4.1 Installing the Hot Key Program for DOS
#To install this program, follow the steps below.
$1. Insert the backup copy of the Reference Diskette into the diskette
$ drive.
$2. At the DOS prompt (usually C:\>), type A:UINSTALL and press Enter.
$ The following screen appears.
+-------------------------------------------------------------------------
¦
$ ¦
¦
$ ¦ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
$ ¦
$ ¦
$ ¦ Enter the installation SOURCE drive letter, the drive that the program
$ ¦ installs FROM:
$ ¦
$ ¦ Source Drive ... [ A ]
$ ¦
$ ¦ Enter F1=Help
$ ¦ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
¦
$3. Press Enter twice.
$ The screen for selection appears.
$4. Using Down Arrow ( ) or Up Arrow ( ) select Install Hot Key Main
$ Program. Press Enter.
$5. Remove the backup copy of the Reference Diskette from the diskette
$ drive.
#6. Type:
# C:\L40SXUT\L40SXHK /MENU
# and press Enter.
#7. Define hot keys for desired functions by following the instructions on
# the menu. Then press F10 to save your definitions.
PS/2 Model L40 SX Quick Reference
Installing the Hot Key Program for DOS
Installation Options
Installation Source Drive
F3=Exit
Follow the instructions on the screen.
The menu for defining hot keys appears.
¦ Copyright IBM Corp. 1991
E.4.1 - 1