IBM L40 SX Quick Reference page 164

#E.4.3 Installing the Hot Key Program for Windows 3.0 Enhanced Mode
#To install this program, follow the steps below.
$1. Insert the backup copy of the Reference Diskette into the diskette
$ drive.
$2. At the DOS prompt (usually C:\>), type A:UINSTALL and press Enter.
$ The following screen appears.
+-------------------------------------------------------------------------
¦
$ ¦
¦
$ ¦ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
$ ¦
$ ¦
$ ¦ Enter the installation SOURCE drive letter, the drive that the program
$ ¦ installs FROM:
$ ¦
$ ¦ Source Drive ... [ A ]
$ ¦
$ ¦ Enter F1=Help
$ ¦ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
¦
$3. Press Enter twice.
$ The screen for selection appears.
$4. Using Down Arrow ( ) or Up Arrow ( ) select Install Hot Key Main
$ Program. Press Enter.
$5. Return to the screen for selection.
$ ( ) select Install Hot Key Program Windows Extension.
$ Follow the instructions on the screen.
$6. Remove the backup copy of the Reference Diskette from the diskette
$ drive.
$7. Press F3 to exit from the screen for selection.
#8. Type:
# C:\L40SXUT\L40SXHK /MENU
# and press Enter.
#9. Define hot keys for desired functions by following the instructions on
# the menu. Then press F10 to save your definitions.
#10. Shut down then restart Windows.
#Notes:
#1. Whenever you changed any hot key definition, you need to restart
# Windows to use the new definition.
#2. To call more than one operational feature, do not continuously press
# hot keys while holding down Ctrl+Alt.
# hot key) and then press the next hot key while holding Ctrl+Alt as
# shown below.
# +---------------------------------------------+
# +- ¦ Press a hot key while holding down Ctrl+Alt ¦
# ¦ +---------------------------------------------+
# ¦ ¦
# ¦
# ¦ +------------------------+
# +--¦ Release the three keys ¦
# +------------------------+
PS/2 Model L40 SX Quick Reference
Installing the Hot Key Program for Windows 3.0 Enhanced Mode
Installation Options
Installation Source Drive
F3=Exit
Follow the instructions on the screen.
Using Down Arrow ( ) or Up Arrow
The menu for defining hot keys appears.
Release three keys (Ctrl+Alt+a
¦ Copyright IBM Corp. 1991
Press Enter.
E.4.3 - 1