Hitachi KP-F37 Operation Manual page 20

Phenomena inherent to CCD imaging device
Following are phenomena inherent to a CCD imaging device , and not defects.
Smear and blooming
When strong light (lamp , fluorescent lamp , reflected light , etc.) is shot , pale bands are displayed
vertically above and below the light.
In this case , change the angle of the camera so that such strong light does not enter the camera
through the lens.
Fixed pattern noise
When the camera is operated in a high temperature , fixed pattern noise may appear on the entire
screen.
The higher the sensitivity of camera , the more this fixed pattern noise appears.
Moire
When fine patterns are shot , moire may be displayed.
The CE mark is required when exporting to Europe. Obtain the necessary authorization for the
customer's system. Enclose the camera in a shielded case and use shielded cable.
KP-F37/F38
11. Notes to users
18