Event Settings - D-Link DCS-7517 User Manual

Configuration
This section explains how to configure the camera to respond to particular
situations (event). One example is configuring the camera to send images to an FTP
server or e-mail address when motion is detected.
Server Settings
Click Add on Event Settings page to open the Server Setting page. On this page,
you can configure up to five servers to save snapshots, video, or system logs to.
Server name: Enter a name for the server.
• Server Type: There are four choices of server types available: E-mail, FTP, HTTP,
and Network storage. Select an item to display detailed configuration options.
You can configure either one or all of them.
E-mail: Select this to send the media files via e-mail when a trigger is activated.
• Sender e-mail address: Enter the e-mail address of the sender.
• Recipient e-mail address: Enter the e-mail address of the recipient.
• Server address: Enter the domain name or IP address of the e-mail server.
• User name: Enter the user name of the e-mail account if necessary.
• Password: Enter the password of the e-mail account if necessary.
• Server port: The default mail server port is set to 25. You can also manually set
another port.
If your SMTP server requires a secure connection (SSL), select This server requires a
secure connection (SSL).
To verify if the e-mail settings are correctly configured, click Test. The result will be
shown in a pop-up window. If successful, you will also receive an e-mail indicating
the result.
Click Save to enable the settings, then click Close to exit the page.
D-Link DCS-7517 User Manual

Event Settings

6517
58