The information and product specifications within this document are subject to change at any time, without notice and without obligation to notify any person of such change. VIA Technologies, Inc. reserves the right the make changes to the products described in this manual at any time without prior notice.
Battery Recycling and Disposal Only use the appropriate battery specified for this product. Do not re-use, recharge, or reheat an old battery. Do not attempt to force open the battery. Do not discard used batteries with regular trash. Discard used batteries according to local regulations. Safety Precautions Always read the safety instructions carefully.
3005 3005 12A1 12A1 1 x AMOS-3005 system unit 1 x AC-to-DC adapter, 2-pole Phoenix plug to DC jack 1 x Screw pack for mounting 1 x Screw pack for Mini PCIe module 1 x Thermal pad for mSATA module 4 x Rubber foot for desktop mounting 1 x Syringe (0.5cc) of thermal grease...
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man Table of Contents 1. 1. 1. 1. Product Overview ........ Product Overview ................................1 1 1 1 Product Overview Product Overview ........
Page 7
Installing the Rubber Feet ................ 48 5.9. Installing the AMOS-3005................ 49 5.9.1. Mounting the AMOS-3005 on Wall/Table ........49 5.9.2. Mounting the AMOS-3005 behind the monitor ......50 6. 6. 6. 6. BIOS Setup BIOS Setup........ BIOS Setup BIOS Setup ........
Page 8
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6.6. Chipset Settings ..................66 6.6.1. DRAM Configuration ................67 6.6.2. Video Configuration ................69 6.6.3. PMU_ACPI Configuration ..............70 6.6.4. HDAC Configuration ................
Page 9
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man Lists of Figures Figure 1: Front side panel....................8 Figure 2: Rear side panel ....................8 Figure 3: Front side view dimensions................9 Figure 4: Top side view dimensions................
Page 10
Figure 58: Mounting the AMOS-3005 system............49 Figure 59: Installing VESA mounting plate..............50 Figure 60: Installing AMOS-3005 to the VESA mounting plate ......51 Figure 61: Illustration of the Main menu screen............54 Figure 62: Illustration of the Advanced Settings screen......... 56 Figure 63: Illustration of the ACPI Settings screen ..........
Page 11
AMOS AMOS- - - - 3005 User Man 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man Lists of Tables Table 1: COM connector pinout ................. 11 Table 2: USB 2.0 lockable port pinout ..............12 Table 3: LAN port pinout ....................13 Table 4: LAN port LED color definition..............
The AMOS-3005 has multiple I/O and connectivity features such as the VGA connector and the HDMI port that enable dual independent displays, two Gigabit Ethernet (RJ-45) ports, two lockable USB 2.0 ports, two USB 3.0 ports,...
The mSATA slot enables the AMOS-3005 to have flexible storage of mSATA flash drive. 1.1.8. Wide Range of Power Sources The AMOS-3005 supports a wide range of input power from DC 9V ~ 36V. The flexibility of power input enables the system to be deployable for various automation environments.
3005 User Man 1.1.11. Multiple Mounting Solutions The AMOS-3005 supports multiple methods for mounting the chassis securely. It can be mounted to a table, wall, and any flat surface or to VESA mountable surfaces with the optional VESA mounting kit.
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 1.2. Product Specifications Computing System Computing System Computing System Computing System Processor Processor Processor Processor 1.2 GHz VIA Eden X4 1066 MHz front side bus 2MB L2 cache System Chipset...
Page 16
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man Storage Storage Storage Storage Interface Interface Interface Interface Supports one mSATA slot Ethernet Ethernet Ethernet Ethernet Controller Controller Controller Controller Two Realtek RTL8111G PCIe Gigabit Ethernet controllers ...
Page 17
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man Mini PCIe Mini PCIe Mini PCIe Mini PCIe slot slot slot slot Controller Controller Controller Controller PCIe x1 Controller built-in VX11chipset ...
Page 18
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man Mechanical Characteristics Mechanical Characteristics Mechanical Characteristics Mechanical Characteristics Construction Construction Construction Construction Aluminum top cover Dual removable front and real metal face plates ...
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 1.3. Layout Diagram Figure Figure 1 1 1 1 : : : : Front Front side panel side panel Figure Figure Front Front side panel...
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 1.4. Dimensions Figure Figure 3 3 3 3 : : : : Front Front side view dimensions side view dimensions Figure Figure Front Front...
2.1.2. LED Indicators There are two LEDs on the front panel of the AMOS-3005 that indicates the status of the system: Power Status LED flashes in green and indicates system’s power status. SSD/HDD LED flashes in red and indicates hard drive storage activity for mSATA flash drive.
3005 User Man 2.1.3. COM Connector The AMOS-3005 has two COM (D-sub 9-pin male) connectors located on the front panel. The COM connectors can be configured as RS-232, RS-422, or RS- 485. The default setting of COM connectors is RS-232. To configure the COM connectors, user needs to setup it into the BIOS.
3005 User Man 2.1.4. Lockable USB 2.0 Port The AMOS-3005 has two lockable USB 2.0 ports (USB0 and USB1) on the front panel. Each port gives complete Plug and Play and hot swap capability for external devices. The USB interface complies with USB UHCI, Rev. 2.0.
2.2. Rear Panel I/O 2.2.1. LAN Port (Gigabit Ethernet) The AMOS-3005 is equipped with two Gigabit Ethernet LAN ports. Both Gigabit Ethernet LAN ports are using 8 Position 8 Contact (8P8C) receptacle connector or commonly referred to as RJ-45. It is fully compliant with IEEE 802.3 (10BASE- T), 802.3u (100BASE-TX), and 802.3ab (1000BASE-T) standards.
3005 User Man 2.2.2. USB 3.0 Ports The AMOS-3005 is equipped with two USB 3.0 ports. The USB 3.0 port has a maximum data transfer rate up to 5 Gbps and offers a backward compatibility with previous USB 2.0 specifications. It gives complete Plug and Play and hot swap capability for external devices.
AMOS 3005 User Man 3005 User Man ® 2.2.3. HDMI Port ® ® The AMOS-3005 has one HDMI port (19-pin HDMI Type C connector) as ® ® defined in the HDMI specification. The HDMI port is for connecting to ®...
3005 User Man 2.2.4. VGA Connector The AMOS-3005 provides a high resolution VGA interface through DE-15 female connector on the rear panel. It supports resolutions up to 2048 x 1536 pixels. The pinout of the VGA connector is shown below.
3005 User Man 3005 User Man 2.2.5. Audio Jacks The AMOS-3005 offers High Definition Audio through 3.5 mm TRS jack connectors on the rear panel: Mic-In and Line-Out The Mic-In jack is for connecting to a microphone. The Line-Out jack is for connecting external speakers or headphones.
3005 User Man 2.2.7. Digital I/O Connector The AMOS-3005 is equipped with one 8-bit Digital I/O (GPIO) connector (D- sub 9-pin), which offers Digital I/O communication interface. The Digital I/O default setting supports up to four GPO and four GPI signals. The pinout of the Digital I/O connector is shown below.
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 3. 3. 3. 3. Onboard Conne Onboard Conne Onboard Conne Onboard Connector and Pin ctor and Pin ctor and Pin ctor and Pin Header Header Header...
AMOS 3005 User Man 3005 User Man 3.2. WLAN Connector The AMOS-3005 is equipped with onboard WLAN USB connector labeled as “JWLAN1” for WLAN USB (Wi-Fi) module. The pinout of the WLAN USB connector is shown below. Figure Figure 17...
3005 User Man 3.3. Mini PCIe Slot The AMOS-3005 is equipped with Mini PCIe slot for wireless networking option such as 3G, GPS and Wi-Fi module. The Mini PCIe is compatible with mini PCIe 2.0 modules that has full-length or half length in size.
AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 3.4. SIM Card socket The AMOS-3005 is equipped with one SIM card socket for 3G network connectivity. Figure Figure Figure Figure 19 19 19 19: : : : SIM Card socket diagram...
3005 User Man 3.6. DDR3 SODIMM Socket The AMOS-3005 comes with one 204-pin DDR3 SDRAM SODIMM socket that support non-ECC DDR3 1333 SODIMM memory module. The memory socket can accommodate up to 8 GB of DDR3 1333 SODIMM memory. The memory socket is labeled as “SODIMM”.
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 4. 4. 4. 4. Onboard Jumpers Onboard Jumpers Onboard Jumpers Onboard Jumpers Jumper Description Jumper Description Jumper Description Jumper Description A jumper consists of pair conductive pins used to close in or bypass an electronic circuit to set up or configure particular feature using a jumper cap.
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 4.1. COM Voltage Select Jumpers The COM connectors on the front panel can be configured to carry +5V or +12V power, or the Ring Indicator (RI) signal by setting the COM voltage select jumpers (JCOMV1 ~JCOMV2).
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 4.1.2. JCOMV2 Voltage Select Jumper The voltage select jumpers “JCOMV2” is set to determine the input carry voltage or Ring Indicator (RI) signal of COM2 connector on the front panel. The control signal Ring Indicator (RI) is the default setting.
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 4.2. USB 2.0 Power Type Select Jumper The jumper “JUSB_SEL1” controls the power type delivered to the USB 2.0 ports (USB0 and USB1) on the front panel and to onboard USB pin header (JUSB2_1).
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 5. 5. 5. 5. Hardware Installation Hardware Installation Hardware Installation Hardware Installation This chapter provides you with information about hardware installation procedures.
Page 41
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man Step 2 Step 2 Step 2 Step 2 Gently detach the front and real panel plates from the chassis. Figure Figure Figure Figure 27 27 27...
Page 42
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man Step 4 Step 4 Step 4 Step 4 Unscrew the four screws on the EMIO-2004 daughter board. Figure Figure 29 29: : : : Unscrewing EMIO Unscrewing EMIO- - - - 2004 daughter board 2004 daughter board Figure...
Page 43
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man Step 6 Step 6 Step 6 Step 6 Flip over the EMIO-2004 daughter board. Peel off the protective (plastic) cover of the pre-installed memory thermal pad on the memory heatsink. Figure Figure Figure...
Page 44
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man Step 8 Step 8 Step 8 Step 8 Push down the SODIMM memory until the locking clips lock the memory module into place. There will be a slight tension as the SODIMM memory module is being locked Step Step 9 9 9 9...
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 5.2. Removing the DDR3 SODIMM memory St St St Step 1 ep 1 ep 1 ep 1 To disengage the locking clips, push the locking clips horizontally outward away from the SODIMM memory module.
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 5.3. Installing the mSATA flash drive module Note: Note: Note: Note: It is highly suggested to use Transcend and ADATA’s mSATA flash drive module. Step 1 Step 1 Step 1...
Page 47
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man Step Step 4 4 4 4 Step Step Flip over the mSATA module. Align the notch on the mSATA module with the notch on the mSATA slot then insert the module at a 30°...
Page 48
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man Step 6 Step 6 Step 6 Step 6 Reinstall the EMIO-2004 daughterboard and the bottom plate. Step 7 Step 7 Step 7 Step 7 Apply a small amount of thermal grease on the outer side of mSATA heatsink before reinstalling the front panel plate.
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 5.4. Reinstalling the EMIO-2004 daughterboard Step 1 Step 1 Step 1 Step 1 Slightly incline the EMIO-2004 daughterboard to the left. Gently slide in the daughterboard until the EMIO female connector on daughterboard is aligned with the EMIO male connector on the EITX-2004 mainboard.
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 5.5. Inserting the SIM card Step 1 Step 1 Step 1 Step 1 Push back firmly the SIM card socket to unlock the opening. Step 2 Step 2 Step 2...
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 5.6. Installing the 3G/GPS/Wi-Fi mini PCIe module Step 1 Step 1 Step 1 Step 1 Align the notch on the 3G/GPS/Wi-Fi module with the notch on the mini PCIe slot.
Page 52
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man Step 3 Step 3 Step 3 Step 3 Remove the 3G/GPS/Wi-Fi antenna hole cover from the front panel plate. To facilitate removing the cover, use a pair of needle-nose pliers to depress both locking clips simultaneously.
Page 53
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man Step 4 Step 4 Step 4 Step 4 Insert the 3G/GPS/Wi-Fi port connector into the antenna hole from the inside of the front panel plate. Insert the washer, fasten it with the nut and install the external antenna.
Page 54
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man Figure Figure Figure Figure 49 49 49 49: Installing the : Installing the : Installing the : Installing the GPS GPS antenna antenna antenna antenna...
Page 55
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man Step 5 Step 5 Step 5 Step 5 Gently connect the mini coaxial cable of the 3G/GPS/Wi-Fi antenna to the mini RF connector on the 3G/GPS/Wi-Fi mini PCIe module.
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 5.7. Installing the WLAN (Wi-Fi) USB module Step 1 Step 1 Step 1 Step 1 Mount the WLAN USB module (VNT9271) on the daughter board (EMIO- 2004).
Page 57
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man Step 3 Step 3 Step 3 Step 3 Remove the WLAN USB antenna hole cover from the front panel plate. To facilitate removing the cover, use a pair of needle-nose pliers to depress both locking clips simultaneously.
Page 58
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man Step 5 Step 5 Step 5 Step 5 Gently connect the mini coaxial cable of the WLAN USB antenna to the mini RF connector on the WLAN USB module (VNT9271).
AMOS 3005 User Man 3005 User Man 5.8. Installing the Rubber Feet Optional rubber feet are available for AMOS-3005 system. It would make the AMOS-3005 system ideal to any flat surfaces such as desk or table. Step 1 Step 1...
Reminders: Reminders: 1. Make sure to remove the rubber feet before mounting the AMOS-3005 system. The rubber feet are not required when securing the system on walls or tables. 2. Do not use other types of screws on mounting the AMOS-3005 system aside from the provided screws to avoid any damages.
AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 5.9.2. Mounting the AMOS-3005 behind the monitor Step 1 Step 1 Step 1 Step 1 Align the mounting holes of the VESA mounting plate to the available VESA holes of the monitor display.
Page 62
AMOS AMOS 3005 User Man 3005 User Man Step Step Step Step 3 3 3 3 Install the AMOS-3005 system to the VESA mounting plate. Figure Figure Figure Figure 60 60 60 60: Installing AMOS : Installing AMOS : Installing AMOS...
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6. 6. 6. 6. BIOS Setup BIOS Setup BIOS Setup BIOS Setup This chapter gives a detailed explanation of the BIOS setup functions. 6.1.
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6.4. System Overview The System Overview screen is the default screen that is shown when the BIOS Setup Utility is launched. This screen can be accessed by traversing the navigation bar to the “Main”...
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6.4.3. System Language This option allows the user to configure the language that the user wants to use. 6.4.4. System Date This section shows the current system date.
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6.5. Advanced Settings The Advanced Settings screen shows a list of categories that can provide access to a sub-screen. Sub-screen links can be identified by the preceding right-facing arrowhead.
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6.5.1. ACPI Settings ACPI grants the operating system direct control over system power management. The ACPI Configuration screen can be used to set a number of power management related functions.
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6.5.2. S5 RTC Wake Settings The S5 RTC Wake Settings screen enables system to wake from S5 using RTC alarm Figure Figure 64 64: Illustration of the : Illustration of the S5 RTC...
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6.5.3. CPU Configuration The CPU Configuration screen shows detailed information about the built-in processor. Figure Figure Figure Figure 65 65 65 65: Illustration of : Illustration of : Illustration of...
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6.5.4. SATA Configuration The SATA Configuration screen allows the user to view and configure the SATA configuration settings. Figure Figure 66 66: Illustration of SATA Configuration screen : Illustration of SATA Configuration screen Figure...
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6.5.5. USB Configuration The USB Configuration screen shows the number of connected USB devices. Figure Figure Figure Figure 67 67 67 67: Illustration of USB Configuration screen : Illustration of USB Configuration screen : Illustration of USB Configuration screen...
Page 73
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6.5.5.3. 6.5.5.3. 6.5.5.3. 6.5.5.3. XHCI Hand XHCI Hand XHCI Hand XHCI Hand- - - - off This is a workaround for Operating Systems without XHCI hand-off support. The XHCI ownership change should be claimed by XHCI driver.
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6.5.6. F71869 Super IO Configuration The F71869 Super IO Configuration screen allows the user to set system Super IO Chip parameters. Figure Figure 68 68: Illustration of F71869 Super IO Configuration screen...
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6.5.8. Clock Generator Configuration The Clock Generator Configuration screen enables access to the Spread Spectrum Setting feature. Figure Figure 70 70: Illustration of Clock Generator Configuration screen : Illustration of Clock Generator Configuration screen Figure Figure...
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6.6. Chipset Settings The Chipset Settings screen shows a list of categories that can provide access to a sub-screen. Sub-screen links can be identified by the preceding right- facing arrowhead.
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6.6.1. DRAM Configuration The DRAM Configuration screen has two features for controlling the system DRAM. All other DRAM features are automated and cannot be accessed. Figure Figure 72 72: Illustration of DRAM Configuration screen...
Page 79
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 667 MHz 667 MHz 667 MHz 667 MHz The 667 MHz option forces the BIOS to be fixed at 1334 MHz for DDR3 memory modules.
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6.6.2. Video Configuration The Video Configuration screen has features for controlling the integrated graphics controller in the VX11 chipset. Figure Figure 73 73: Illustration of Video Configuration screen : Illustration of Video Configuration screen Figure...
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6.6.3. PMU_ACPI Configuration The PMU_ACPI Configuration screen can be used to set a number of power management related functions. Figure Figure 74 74: Illustration of PMU_ACPI Configuration screen : Illustration of PMU_ACPI Configuration screen Figure...
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6.6.5. Others Configuration The Others Configuration screen can be used to set Watchdog Timer Configuration. Figure Figure 76 76: Illustration of Others Configuration screen : Illustration of Others Configuration screen Figure Figure...
Page 84
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6.6.5.4. 6.6.5.4. 6.6.5.4. 6.6.5.4. WATCHD WATCHD WATCHD WATCHDOG OG Timer COUNT Timer COUNT Timer COUNT Timer COUNT The WATCHDOG Timer COUNT feature determines the length of time the timer should count when the timer is first triggered.
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6.7. Boot Settings The Boot Settings screen has a single link that goes to the Boot Configuration Boot Configuration Boot Configuration Boot Configuration and Boot Option Priorities Boot Option Priorities...
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6.7.2. Boot Option Priorities The Boot Option Priorities screen lists all bootable devices. 6.7.2.1. 6.7.2.1. Launch Launch PXE PXE OpROM policy OpROM policy 6.7.2.1.
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6.8. Security Settings The Security Settings screen provides a way to restrict access to the BIOS or even the entire system. Figure Figure Figure...
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6.9. Save & Exit The Save & Exit Configuration screen has the following features: Figure Figure Figure Figure 79 79 79 79: Illustration of Save &...
AMOS- - - - 3005 User Man AMOS 3005 User Manual AMOS AMOS 3005 User Man 3005 User Man 6.9.4. Discard Changes and Reset This command reverts all changes to the settings that were in place when the BIOS Setup Utility was launched. Save Options Save Options Save Options...
Software and Technical Supports Supports Supports Supports 7.1. Microsoft and Linux Support The VIA AMOS-3005 is highly compatible with Microsoft Windows and Linux operating systems. 7.1.1. Driver Installation Microsoft Driver Support Microsoft Driver Support Microsoft Driver Support Microsoft Driver Support...