Num'axes CANICALM User Manual page 10

Fig. 1
Fig. 2
Checking / replacing battery
Should the level of the battery come down, the collar emits a continuous beep. Turn the
On/Off switch to Off . Open the box by removing the screw on the cover, opposite the
electrodes. Remove the used battery and insert the new one paying attention to follow
polarity indicated on the battery housing.
Put the cover back on the box. Turn the switch On and after a few seconds, a beep
sound of 1 second will be emitted, indicating that the collar is correctly initialised.You will
be able to obtain 3V lithium CR 123 A batteries from your supplier.
GB
10