Operation - Sartorius U 4100 Instruction Manual

Operation.

The weight display shows the following special
Status messages for your Information:
BUSY
The processor is still busy processing a function and will not ac-
cept any other commands to perform functions at this time.
STANDBY
The balance has been turned off with the ON/OFF key (5) and
is now in the STANDBY mode and ready to operate without
warmup.
POWER OFF
The balance was disconnected from line power (reconnection to
line power, power failure).
CAL
The calibration function has been called.
In addition to grams, this balance gives you a variety of
other international weight unit options to work with.
Select the weight unit you need from the table of the menu op-
tions for the balance operating program, and set the appropriate
code(s) as described in the section "Balance Operating Pro-
gram."
7