Remote Control - Toshiba 43L310U Manual

Problem Solution
The picture has a
• A few bright or dark spots on an
few bright or dark
spots.
Good picture, but
• Increase the volume.
no sound.
• Make sure that the sound is not
• Make sure that you do not have
• Make sure that the TV
• If you are using a home theater
• If you are using a home theater
• If you are using a home theater
• Make sure that the audio cables
• Make sure that the antenna or
• The audio cables you are using
Poor picture.
• Make sure that the room is not
• If an S-VHS camera or a
76
LCD screen is normal. It does
not affect the operation of
your TV.
muted.
headphones connected. When
headphones are connected, the
TV speakers are muted.
Speakers option on the Sound
menu is not set to Off.
system, sound bar, or external
speaker system, make sure it is
turned on and is not muted.
system, sound bar, or external
speaker system, make sure that
you have selected the correct
output mode.
system, sound bar, or external
speaker system and have
connected it with a digital
optical cable, go to the Sound
menu, highlight Digital Audio
Format, then press ENTER.
Highlight Audio Format, then
press ENTER. Press or
select PCM, then press ENTER.
See the Digital Audio Format
option in Adjusting sound
settings on page 55.
are connected correctly and
securely to your TV.
cable TV is connected correctly
and securely. See Connecting a
cable or satellite box on
page 18 or Connecting an
antenna or cable TV (no box)
page 23.
may be bad. Try a new set.
too bright. Light reflecting off
the screen can make the picture
difficult to see.
camcorder is connected while
another connected device is
turned on, the picture may be
poor. Turn off one or more
devices.
www.tv.toshiba.com
Problem
Good sound, but
poor color.
Audio noise.
No output from
one of the
speakers.
After images
appear.
to

Remote control

Problem
Remote
control does
not work.
on
Toshiba 43"/49"/55" 1080p 60Hz LED TV
Solution
• Adjust the contrast, color, and
brightness settings. See
Adjusting the TV picture
page 51.
• Other devices (for example, a
surround sound receiver,
external speakers, fans, or hair
dryers) may be interfering with
your TV. Try turning off one
device at a time to determine
which device is causing
interference. After you have
determined which device is
causing interference, move it
further from the TV to eliminate
the interference.
• Adjust the audio balance. See
Adjusting sound settings
page 55.
• Make sure that the audio cables
are connected correctly and
securely to your TV.
• Do not display a still image,
such as a logo, game, or
computer image, for an
extended period of time. This
can cause a permanent
after-image to be burned into
the screen. This type of damage
is not covered by your warranty.
Solution
• Make sure that the power cord is
plugged into a working outlet.
• Make sure that there are no
obstructions between the remote
control and the remote control
sensor on the front of the TV.
• Point the remote control directly at
the remote control sensor on your
TV. For the location of the remote
control sensor, see Aiming the
remote control on page 38.
• The supplied batteries are wrapped
tightly in clear plastic. Make sure
that you have removed this plastic
from the batteries.
• Make sure that the batteries are
installed correctly. See
remote control batteries
page 38.
• Replace dead batteries with new
batteries. See Installing remote
control batteries on page 38.
on
on
Installing
on