Using The Remote Control; Installing Remote Control Batteries; Aiming The Remote Control - Toshiba 43L310U Manual

Using the remote control

This section includes topics about:

• Installing remote control batteries

• Aiming the remote control

• Programming the CH RTN button
Installing remote control batteries
1 While squeezing the release latch on the back of
the remote control, lift the battery compartment
cover off the remote control.
2 Insert two AAA batteries into the battery
compartment. Make sure that you match the +
and – symbols on the batteries with the + and –
symbols in the battery compartment.
3 Replace the battery compartment cover.
Cautions
• Batteries should not be exposed to
excessive heat, such as sunshine, heat
registers, or fire.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery
compartment with a cloth. If chemicals
touch your skin, wash immediately.
• Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is
depleted.
• If the remote control is not going to be
used for an extended period of time,
remove the batteries.
38
Aiming the remote control
• Point the remote control towards the remote
control sensor on the front of your TV.
43-inch model
Remote control
49-inch and 55-inch
www.tv.toshiba.com
Toshiba 43"/49"/55" 1080p 60Hz LED TV
sensor
Remote control
sensor