Using The Remote Controm; Preparing The Remote Control For Use; Installing The Remote Control Batteries; Using The Remote Control With A Cable Tv Converter/Satellite Receiver, Vcr Or Dvd Player - Toshiba FSTPURE 26HF84 Owner's Manual

÷
÷
Using the remote controR
Preparing the remote controm for use
With the remote control, you can operate your TV, most cable TV
converters/satellite receivers, VCR and DVD player models together,
even if they are different brands. If you will be using your TV with a
Toshiba satellite receiver, VCR or DVD player, your remote control is
already programmed and ready to use. If you own different brands of
cable TV converters/satellite receivers, VCRs and/or DVD players, you
first have to program your remote control. (See "Programming the
remote control for use with a cable TV converter/satellite receiver, VCR
or DVD player" on page 17.)
_nstaHing the remote controm batteries
To inetalm the batteries:
1. Open the battery cover on the back of the remote control.
2. InstalI two "AA" size batteries. Match the + and - signs on the
batteries to the signs on the battery compartment.
3. Close the battery cover on the remote control until the lock snaps.
Note:
The TV remote control may or may not
operate your came TV converter/sateflite
receiver, VCR or D VD player, Refer to the
owner's manuals suppfied with the equipment
to see which features are available, in
addition, the original controllers may have
features not available on this remote control
If you would like to continue to use these
features, you may want to use the original
remote control
Cautions:
, Dispose of batteries in a designated
disposal area, Do not throw batteries into a
fire,
, Do not mix battery types or combine used
batteries with new ones,
, Remove dead batteries immediately to
prevent battery acid from leaking into the
battery compartmenL
, ffyou do not intend to use the remote control
for a tong time, remove the batteries,
Using the remote control with a cable TV converter/satellite receiver, VCR or DVD player
TV, CBL/SAT,
VCR o DVD
selector
Channel A'_'
Volume AV (TV)
Mute (TV)
TV/VCR
To controm a cabBe TV
converter/satellite Input (TV)
receiver:
Program the remote
control to recognize the Channel
brand of your cable TV Numbers
converter/satellite
receiver (see "Program- CH
Pic Size (TV)
ming the remote controi
for use with a cable TV
converter/satellite
receiver, VCR or DVD
pIayer" on page 17.) The
buttons shown at right will
control the cable TV
converter/satellite
receiver.
Set the TV oCBL/
SAT oVCR oDVD
selector to "CBL/SAT" Light
first.
To control a VCR:
Program the remote
control to recognize
the brand of your VCR
(see "Programming the
remote control for use
with a cable TV
converter/satellite
receiver, VCR or DVD
player" on page 17.)
The buttons shown at
right will then control
the VCR.
Set the TV oCBL/
SAT oVCR/DVD
selector to "VCR" first.
Input (TV)-
Power --
Channel --
Numbers
CH Enter_
Pic Size (TV) --
Volume ,&V (TV) --
TV o CBL/SAT
, VCR, DVDq,
selector q
Channel J,V
Mute (TV)-
VCR controls --
Light --
®®®C_
16
÷
3R40121A/E P16-23
÷
6/7/04, 18:57