Connecting A Dvd Or Blu-Ray Player; Hdmi (Best) - Toshiba 43L310U Manual

Connecting a DVD or Blu-ray player

Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see
You can connect a DVD or Blu-ray player using:

• HDMI (best)

• Component video (better)
• AV (composite video) (good)
HDMI (best)
On your TV
HDMI cable
connector
HDMI jack
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT jack on
the DVD or Blu-ray player.
3 Plug your TV's power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
4 Press INPUT to open the Input Selection list.
5 Press or to highlight HDMI 1, HDMI 2, or HDMI 3, then press ENTER.
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
24
DVD or Blu-ray
player
www.tv.toshiba.com
What connection should I use?
Side of TV
HDMI cable
Toshiba 43"/49"/55" 1080p 60Hz LED TV
on page 17.