Using The Channel Browser; Channel Browser Overview; Setting Up The Channel Browser - Toshiba 43L310U Manual

43L310U/ 49L310U/55L310U Toshiba 43"/49"/55" 1080p 60Hz LED TV
4 Highlight On or Off, then press ENTER.
5 Press EXIT to close the menu.
Notes
• The picture turns off in about five
seconds.
• Press any button to turn on the picture
for about five seconds.
• To exit audio only mode, repeat this
task and select Off.

Using the Channel Browser

This section includes topics about:

• Channel Browser overview

• Setting up the Channel Browser

• Selecting a channel or input in the Channel Browser
• Adding and clearing channels and inputs in the
History list
Channel Browser overview
The Channel Browser lets you:
• Navigate through channels and inputs
• Tune to recently viewed channels and inputs in the
Channel Browser History list
• Tune to favorite channels in your Favorite channel
list
# Item
Indicates which list is currently displayed.
Available lists include:
• History
• ANT/CABLE
1
• Inputs
• Favorites
• HDMI® CEC
Indicates whether an item is a channel or
2
input type.
Indicates the channel or input currently
3
being viewed.
Indicates the channel or input currently
4
highlighted in the browser.
Shows the channels stored in the current
5
list.
Setting up the Channel Browser
1 Press MENU, press
then press ENTER.
2 Highlight Channel Browser Setup, then press
ENTER.
3 Press
to select Browse Mode or Select Mode.
• Browse Mode—When you highlight a channel
or input, your TV automatically switches to the
channel or input.
• Select Mode—When you highlight a channel or
input, you must press ENTER to switch to the
channel or input.
4 Highlight a list, then press
Off. When a list is turned on, you can select the list
in the Channel Browser. You can select:
• History List—Shows all the channels and inputs
you have selected. The History list is cleared each
time you turn off your TV.
• ANT/CABLE List—Shows a list of the channels
you can view from a device connected to the
ANT/CABLE IN jack on your TV (an antenna or
cable TV with no box). If you want to view only
the channels with a signal, you must scan for
available channels. If you did not scan for
channels when you set up your TV for the first
time, see
on page 59.
• Inputs List—Shows the available video inputs.
www.tv.toshiba.com
or to highlight Options,
to highlight Navigation, then press
or to select On or
Automatically scanning for channels
or
57