Av (Composite Video) (Good) - Toshiba 43L310U Manual

43L310U/ 49L310U/55L310U Toshiba 43"/49"/55" 1080p 60Hz LED TV

AV (composite video) (good)

Notes
On your TV
AV cable Audio cable
connector connectors
AV jack Analog
audio jacks
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an AV cable (not provided) to the green Y/VIDEO jack and AUDIO L and R jacks on the back of your TV and
to the AV and audio out jacks on the cable or satellite box.
Important
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the Input Selection list.
6 Press or to highlight AV, then press ENTER.
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green
Y/VIDEO jack.
Cable or
satellite box
Cable
wall jack
• The Y/VIDEO, P , and P
B
device) share the AUDIO L and R jacks with the Y/VIDEO jack (used to
connect an AV device). You can only connect one component video or
AV device at a time. We suggest upgrading to HDMI if your cable or
satellite box supports it.
• When you connect the audio using the AUDIO L and R jacks, the audio
output is analog.
AV cable
video jacks (used to connect a component
R
www.tv.toshiba.com
Back of TV
21