Turning Off The Automatic Power-Off Feature; Video And Audio - Toshiba 43L310U Manual

Turning off the automatic power-off feature

Your TV automatically turns off after 15 minutes when
no video signal is detected.
You might want to change this setting to Off if:
• The incoming signal for an analog channel is too
weak for your TV to detect.
• You connected an audio-only device (such as a
CD player) to the AUDIO L and R jacks to listen to
music through the TV speakers.
1 Press MENU, press
then press ENTER.
2 Highlight Power Management, then press
ENTER.
3 Highlight No Signal Power Down, then press
ENTER.
4 Highlight an input source, press
Off or On, then press ENTER.
5 Press EXIT to close the menu.
74
or to highlight Options,
or to select
www.tv.toshiba.com
Toshiba 43"/49"/55" 1080p 60Hz LED TV

Video and audio

Problem Solution
Picture does not
• Press PIC SIZE to change the
fill the screen.
There are black
bars around the
picture.
No picture (screen
• Press
is not lit) and no
sound.
• Make sure that the Audio Only
• Make sure that the video cables
• Adjust the contrast and
• Make sure that the power cord
• Press INPUT and make sure that
• Try another channel. The station
• Make sure that the incoming
• Make sure that the antenna or
• Check the closed caption
aspect ratio. See Adjusting the
picture size on page 53.
on the TV or the
remote control.
option is set to Off. See Playing
TV audio only on page 56.
are connected correctly and
securely to your TV.
brightness. See Adjusting the
TV picture on page 51.
is plugged into a working
outlet.
the correct video input source is
selected. See Selecting the
video input source on page 41.
may be experiencing problems.
signal is compatible.
cable TV is connected correctly
and securely. See Connecting a
cable or satellite box on
page 18 or Connecting an
antenna or cable TV (no box)
page 23.
settings. Some TEXT modes can
block the screen. See Using
closed captioning on page 68.
on