Component Video (Better) - Toshiba 43L310U Manual

Component video (better)

Note
Cables are often color-coded to match color-coded jacks.
On your TV
Component Audio cable
video cable connectors
connectors
Component Analog
video jacks
audio jacks
1 Make sure that your TV's power cord is unplugged and the game console is turned off.
2 Connect the video and audio connectors on the component video cable (not provided) to the Y/VIDEO, P
video jacks and AUDIO L and R jacks on the back of your TV and to the component jack(s) on the game console.
Important
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the game console, then set it to the correct output mode. For more information, see the documentation that
came with the console.
5 Press INPUT to open the Input Selection list.
6 Press or to highlight COMPONENT, then press ENTER.
28
Game console
• Your game console may require a special component video cable. See
the documentation that came with your game console or check the
manufacturer's website.
• The Y/VIDEO, P , and P
B
device) share the AUDIO L and R jacks with the Y/VIDEO jack (used to
connect an AV device). You can only connect one component video or
AV device at a time. We suggest upgrading to HDMI if your game
console supports it.
• When you connect the audio using the AUDIO L and R jacks, the audio
output is analog.
Console-specific
component video and
audio cable
Back of TV
video jacks (used to connect a component
R
www.tv.toshiba.com
Toshiba 43"/49"/55" 1080p 60Hz LED TV
, and P
B R