Using The Remote Contro; Preparing The Remote Control For Use; Installing The Remote Control Batteries; Using The Remote Control To Operate Your Other Devices - Toshiba FSTPure 32AF45 Owner's Manual

÷
÷
Using the remote controR
Preparing the remote controm for use
With the remote controi, you can operate your TV, most VCR and DVD
player models, and cable TV converters together, even if they are
different brands. If you will be using your TV with a Toshiba VCR or
DVD player, your remote control is already programmed and ready to
use. If you own different brands of VCRs, DVD players and/or convert-
ers, you first have to program your remote control. (See "Programming
the remote control to operate your other devices" on page 12.)
Rnstalling the remote control batteries
To install the batteries:
1. Open the battery cover on the back of the remote control.
2. InstalI two "AAA" size batteries. Match the + and - signs on the
batteries to the signs on the battery compartment.
3. Close the battery cover on the remote control until the lock snaps.
Note:
The TV remote control may not operate your
VCR, DVD player, or cable TV converte_
Refer to the owner's manual suppfied with the
applicable equipment to see which features
may be available. Addifionah'y, the remote
control for this TV may not support certain
features available on the original remote
controls for such additional equipment, in which
case, it is suggested that you use the original
remote control for the applicable device.
Caution:
Never throw batteries into a fire,
Notes:
* Be sure to use AAA size batteries.
Dispose of batteries in a designated
disposal area.
Batteries should always be disposed of wit,_
the environment in mind. Always dispose of
batteries in accordance with applicable taws
and regulations.
If the remote control does not operate
correctly; or if the operating range becomes
reduced, replace batteries with new ones.
When necessary to replace batteries in the
remote control always replace both batteries
with new ones. Never mix battery types or use
new and used batteries in combination.
Always remove batteries from remote control
if they are dead or if the remote control is not
to be used for an extended period of time.
This w#tprevent battery acid from leaking into
the battery compartmenL
÷
remote control to
operate your other
devices" on page 12).
The buttons shown at
right will then control
the VCR. Press the
VCR button first.
Using the remote control to operate your other devices
To control a VCR: VCR- ................. To control a DVD player:
Program the remote Power- Program the remote
control to recogoize control to recogolze the
the brand of your VCR brand of your DVD
(see "Programming the Channel- player (see
Numbers
Channel +/- --
CH Enter-
Fast Forward
Play 4
Rewind 1
TV/VCR 1
Record -4
Stop --
VCR CH A/_'
Pause/Still --
Power --
DV D --
Number -
buttons
DVD MENU
Enter --
"Programming the
remote control to
operate your other
devices" on page 12).
The buttons shown at
right wiII then control the TOP Menu --
DVD player. Press the Volume
A/V TV)-
DVD button first. Display_
DVD Clear -- _
Fast Forward --_
Play
Rewind 4 -E_
DVD Menu
stop
DVD Skip _ / _
Pause/Still
11
J3S90121A(E) P07-16 11 _ 9/03/2005, 5:57 PM