Connecting A Dvd Player With Component Video And A Vcr - Toshiba 30HF83 Owner's Manual

Connecting a DVD player with component
video and a VCR
This connection allows you to watch DVD, VCR, and TV programs,
and record TV programs.
Your TV has ColorStream ® (component video) inputs. Connecting
your TV to a DVD player with component video inputs (such as a
Toshiba DVD player with ColorStream ®) can greatly enhance picture
quality and realism.
- To record one TV program while watching another TV program,
tune the VCR to the channel to record, and tune the TV to the
channel to watch.
- To record a TV program while watching a DVD, tune the VCR to
the channel to record, and select ColorStream HD-1 on the TV (see
"Selecting the antenna input" on page 21).
You will need:
• two coaxial cables
• one set ofstandardA/V cables
• one pair of audio cables
• one set of component video cables
Stereo VCR
From Antenna
TV
DVD Player with component video
Note:
For the highest possiblepicture quality,use
component video cables (or a DVI D single
link cable) between the TVand DVD player
Youcan connect component video cables to
either set of Ce/erStreamjacks on the TV
CHD l or HD 2).
TheColorStream HD 1 and HD 2jacks can
be used with ProgressiveC480p,720p) and
Interlaced (480_ 10800scan systems A 1080i
signal will provide the best picture
performance.
ff yeur DVD player doesnot have component
video (or DVl/HDCR) use the S video
connections plus the standard audio
connections instead Do not connect both
S tddeoand standard video cables to VIDEO
1 (or VIDE02) at the same time or the
picture performance will be unacceptable
Seepage 9
For DVI/HDCP connection, see page 13
The unauthorized recording, use,
distribution, or revision of television
programs,videotapes, DVDs, and other
materialsis prohibited under the
Copyright Lawsof the United States and
other countries, and may subject you to
civil and cdminal liability.
10